Version 0.9.11 – June 14, 2018

• Fixed the issue that ideaMaker does not keep the same sort order of files as the sort order in printers
• Fixed the issue that the network is not connected automatically after reboot while using Ethernet

Version 0.9.10 – June 5, 2018

• Added Extruder Offset Settings for N series printers
• Added an option to choose Single or Dual version of motion board firmware update under Maintenance
• Added more information into serial log
• Adjusted preheating sequence to let the heated bed heating together with nozzles for Pro2 series printers
• Added an option to disable the password to get access the remote control the touchscreen from ideaMaker when Remote Access without Password under Setting -> More Settings -> Privacy and Security disable. If you disable this option, you need set a password for remote control
• Added an option to set the Z position of print bed dropping to after print stopped under Setting -> More Settings -> Advanced Settings
• Added an option to set whether WLAN Password is allow to be seen or not under Setting -> More Settings -> Privacy and Security
• Added Auto Negotiation, Port Speed, Duplex Mode as advanced settings for Ethernet tuning under Ethernet setting page. They will be available when Enable Advanced Settings enabled
• Added temperature check for CPU of screen logic board under Maintenance
• Fixed preheating issue after resuming a print. Or with Cool down after a print paused enabled, the print may directly start without preheating first

Version 0.9.9 – May 16, 2018

Read more about this version

• Added a firmware upgrade wizard in Maintenance under Other
• Added a Reconnect Serial Port button in Maintenance under Other -> Safe Mode
• Added Enable Extruder Offset and Extruder Offset settings under More Settings -> Hardware -> Extruders
• Added a Turn on filament sensor option under Advanced Settings
• Added a Cool down after a print paused setting under Advanced Settings
• Added sorting options for files and folders inside Local storage and USB storage
• Added auto-preloading filament before unloading (for Pro2 series printers)
• Added Camera function for Pro2 series
• Added Allow Remote Access without Password
• Added German Language
• Fixed Wi-Fi connection failure issue with non-Latin characters in Wi-Fi name
• Fixed long-time print resume loading issue after pausing by code M2000
• Fixed the height display issue during multi-object print
• Saved Loading/Unloading nozzle temperature after reboot
• Saved Move Step unit after reboot

Version 0.9.7 – January 16, 2018

Read more about this version

• Lower Printing Temperature Available
• User-defined Screen Lock Timeout
• Empty Password for Screen Lock
• SSH Password Security for Privacy and Security
• Backup Credential File
• Export Local Storage
• Check Storage Space before Operation
• User-defined Jerk
• User-defined Acceleration
• Save More Records for Serial Port Log
• Fixed the bug of temperature not updating in time
• Pause Reason Prompt

Version 0.9.2 – June 14, 2017

• Added option to clear print statistics
• Added option to reset privacy and security settings
• Added option to restore factory settings
• Added option to disable or enable collecting print statistics in dashboard
• Added option to set steps per unit and PID settings
• Fixed the issue that the height ratio of the printed models is incorrect when printing multiple models in sequential order

Version 0.9.0 – March 29, 2017

• Added support for Russian language
• Added support for Japanese language
• Added a feature to restore last saved screen brightness
• Added a feature to show the estimated completed time
• Added a feature to show the initialization stage of WiFi and Ethernet
• Added option to set the target pre-heat temperature while recovering the print job
• Added option to clear print information after the print job is completed
• Added option to enable screen lock
• Cooling down the extruders after finishing loading or unloading filaments
• Improved connecting via ethernet with a static IP address
• Corrected gcode name and file size in dashboard

Version 0.8.0 – November 21, 2016

• Added print time and material used in preview mode
• Added a function to sync real time when turning on the printer
• Added a function to record printing time and material used amount
• Improve the uploading speed of gcode
• Show target parameter and current parameter in Tune menu
• Fixed a bug of not enabling DHCP when connected with LAN
• Fixed the problem of wrong printing speed after resuming

Version 0.7.2 – August 19, 2016

• Added a cursor in input box
• Added a record of serial port log which can be loaded out to USB device or SD card
• Added a prompt of the error of motion board
• Added a Z drop when print finish in order to remove the model easily
• Fixed some problems of UI display
• Fixed a bug of keyboard letter
• Fixed a bug of recognizing notes when reading gcode

Version 0.7.0 – June 15, 2016

• Added a feature to pre-extrude manually while retracting filaments
• Added “FastStop” function to stop printing while pre-heating extruders and heat bed
• Added update notifier
• Added a feature to set SSH password
• Added French language support
• Added support for setting up custom WiFi
• Added a function of system monitoring to shut down touchscreen under crash situation
• Improved virtual keyboard for extended symbols
• Added a function to check uploaded file information and print uploaded file in upload queue
• Improved WiFi connection

Version 0.6.7 – April 27, 2016

• Added a feature to display current layer number and printed height in ‘Home’ page
• Added a feature to adjust the flow rate for left/right nozzle separately in ‘Tune’ page
• Added a feature to show motion controller board firmware version in ‘Setting’ page
• Added a feature to show the full name of the firmware when selected
• Fixed a bug of printing with wrong nozzle after pausing to swap filament

Version 0.6.5 – March 29, 2016

• Added printing task recovery list (support recovering interrupted printing task due to motion controller board error, file error and power loss)
• Added a function to create folders in local storage
• Added a function to copy, move, delete and rename multiple files and folders
• Added a safe mode for printer, supporting all operations except printing and controlling XYZ axis and extruders
• Added a battery volume display
• Added WiFi signal strength display
• Added a setting for time and time zone
• Added a function to set temperature in the “Home” page
• Added a function to restore default flow rate after finishing print
• Improved system stability
• Added a function to refresh the model list after finishing uploading
• Fixed a bug to delete .data file with .gcode file together
• Fixed a bug when resuming from pause

Version 0.6.1 – January 31, 2016

• Add electrical board error information reminder
• Fix a loading bug when resuming or re-print a job
• When changing settings under ‘Tune’ menu, there is no need to delete the existing number before inputting new number and the existing number is highlighted
• Add a print cache file to help resuming or re-print a job

Version 0.5.8 – January 13, 2016

• Force cooling all of nozzles while printing is stopped or finished
• Improve moving step of nozzle while calibrating bed level
• Improve touch experience
• Add popup message with sensor issues
• Fix issues on UI interface

Version 0.5.7 – January 8, 2016

• Improve error handling for file cache
• Hide empty USB drive
• Fix encoding issue while transferring list of file names
• Fix issue that files view is invalid while USB or SD card has been plugged out

Version 0.5.6 – January 6, 2016

• Added file cache while print files from SD card or USB
• Added file remove functionality
• Added battery voltage view in Setting-Other tab
• Added tip for saving dump file on the screen while power loss is occurred
• Fix encoding issue while parsing print template
• Fix issue that file info is incomplete in the uploading queue
• Improved UI layout