Tungsten Carbide Nozzle for Raise3D, Wanhao, Ultimaker, Prusa, Lulzbot & more by DYZE DESIGN

Last modified on 26 March, 2018 at 18 h 06 min
317

The ultimate 3d printing nozzle for people looking for the best balance between wear resistance and high performance.

 

Back this Project

About this project :

As DYZE DESIGN rightly says, nozzle is the most important and the final step in your extrusion system of all 3d printer FDM. Filament flows through this very small orifice, by the pressure generated by the extruder pinch system. This flow can reach a hight pressure.

With plain filament like PLA or ABS plastic, any common metal can easily hold up against the flow. Unfortunately, once we start using plastic filaments with hard reinforcement fibers such as carbon and glass, things start to get more complicated; these reinforcement materials will scratch the inner wall of your nozzle orifice as they pass due to the flow and pressure. Both glass and carbon are known to be very hard, a lot harder than any metals, resulting in what is known as abrasion inside your nozzle. The more you print; the worse it gets…

That’s why DYZE DESIGN designed the Tungsten Carbide Nozzle: a state of the art 3d printer nozzle that offers good durability and performance for almost any machines, such as Ultimaker, Raise3d, Wanhao (Monoprice), Prusa, Makerbot, Robo, LulzBot, Flashforge and many more 3D printers.


Features

Ultra wear resistant

The high hardness of tungsten carbide will provide a carefree extrusion experience. Its
unparalleled wear resistance will ensure that both the nozzle diameter and flat will keep the
same dimension. and so will your printed parts.

Low pushing force

The high thermal conductivity of both the nozzle tip and body will pump all the required heat to maintain an even temperature while extruding.
Viscosity highly depends on the plastic temperature for a constant shear rate. The flow
pressure will be constant resulting in excellent results and stability. The ease of pushing the
filament will give an extra margin for your extruder safety.

Faster speed

Due to the high thermal performance of the nozzle in general. the printing speed can be
pushed even further without sacrificing the quality. The inside shape of the nozzle was
specially engineered in order to improve the flow where the diameter gets reduced. thus
allowing a faster flow rate.

Low friction

The whole nozzle is electroless nickel plated for enhanced slippery properties. Plastic will slide on the nozzle instead of sticking to it. This result is cleaner parts and less dragging problems.

Any material

From printing PLA to carbon fiber reinforced plastics. this nozzle can handle anything. The
low friction coating greatly helps with flexible filaments allowing. them to slide through the
nozzle. A single nozzle will offer quality prints.wear resistance. and high flow. so there is no
need to get a ton of different nozzles when a single one can offer the best of all worlds.

Unbeatable price / performance

Tungsten carbide is easier to produce than corundum (Sapphire. Ruby. etc) and the
performance is very similar for abrasion and much more perforrnant for thermal conductivity. The use of steel makes it very easy to manufacture and offers amazing thermal performance. The whole package is a win-win situation in terms of performance and price.


Compatible Printers

Tungsten carbide UM3

Ultimaker 3

Tungsten Carbide M6 1.75mm

Raise3D N1
Raise3D N2
Raise3D N2 Plus
Prusa i3 MK2
Prusa i3 MK3
E3D BigBox
gCreate gMax 1.5XT+
Makerbot Replicator 2
Makerbol Replicator 2X
Felix Pro 2
Creality CR-10
MakerBot Replicator 5 th Gen
MakerBot Replicator Mini
MakerBot Replicator Z18
CraftBot 2
CraftBot PLUS
BQ Witbox
BQ Prusa I3 Hephestos
Robo R1
Robo R1 +PLUS
Robo C2
Robo R2

Tungsten Carbide M7 MK10

FlashForge Creator Pro
FlashForge Creator X
FlashForge Dreamer
FlashForge Finder
Qidi Tech X-One
Qidi Tech
Dremel Idea Builder
PowerSpec 30 Pro
PowerSpec 3D X
Wanhao Duplicator 45
Wanhao Duplicator 4X
Wanhao i3
Monoprice Maker Select 3D Printer V2
Monoprice Maker Selecl Plus
Cocoon create 30 Printer

Tungsten carbide M6 High Flow 3.00mm

LulzBot Tel 5 MoarStruder
LulzBot Taz 6 MoarStruder

Tungsten Carbide M6 3.00mm

Ultimaker 2+
Ultimaker 2+ Extended
Ultimaker Original
Ultimaker Original+
LulzBot Mini
Lulzbot TAZ 5
Lulzbot TAZ 6
3ntr A2 v2
3ntr A4 v3
Makerbot Replicator 1

Hot-ends

Tungsten Carbide UM3

Ultimaker Heatcore

Tungsten Carbide M6 1.75mm

Hexagon
e3D

Tungsten carbide M6 3.00mm

Hexagon
e3D
Olson Block

Tungsten Carbide M7 Mk10 nozzles

All MK10

Tungsten Carbide M6 High Flow 3.00mm

e3D Volcano
LulzBot

Not yet compatible

M6 3.50mm nozzles
Afinia H479
Afinia H480
Up Plus
Up Plus 2
Up Mini
Zortrax M200

Fine thread
Wanhao Duplicator 5
Wanhao Duplicator 5S
Wanhao Duplicator 5S MINI

Female thread
Prinlrbol Ubis

Back this Project

Facebook Comments

LEAVE A REPLY

Please enter your comment!
Please enter your name here

:bye: 
:good: 
:negative: 
:scratch: 
:wacko: 
:yahoo: 
B-) 
:heart: 
:rose: 
:-) 
:whistle: 
:yes: 
:cry: 
:mail:   
:-(     
:unsure:  
;-)